Newsletter 高速鐵路簡訊 . 交通部高速鐵路工程局
機場捷運中央監控系統多功能終端機簡介 Introduction to the Multi-Function Terminal of SCADA in the TIAA MRT System
行控中心。

機場捷運計畫核心機電-中央監控系統多功能終端機(MFT),是以微軟作業系統為核心之工作站,目的在於提供全線各車站水電環控系統(含建築物管理系統)及核心機電各系統設備之遠端監視及控制功能。可協助機場捷運之核心管理中樞全面掌握現場情報資訊,不但可縮短進而採取合適的應變處理決策,更能增加應變與救援效率。
機場捷運中央監控系統在中央控制室、機廠控制中心、各車站、維修管理中心或是檢閱訓練室,均設置MFT,供營運單位進行全線之營運監視控制作業。以下謹就中央控制室、機廠控制中心及車站之MFT作簡要介紹。
中央控制室為機場捷運之核心控制中心,位於青埔機廠行車控制室內,為全年無休之運作模式。主要工作人員包括值班經理、路線控制員、行車資訊顯示助理、設備監控經理等,負責機場捷運系統主線之監視及控制功能,為機場捷運計畫營運、運轉、調度、支援及應變決策之核心管理中樞。
機廠控制中心,分別設在青埔機廠與蘆竹機廠。機廠控制中心機廠控制員能監控機廠供電系統、建築物管理系統、廣播系統、閉路電視系統及所有設定的監視點。青埔機廠控制中心並可支援蘆竹機廠廠區供電系統調度。
各車站站務室設有一組車站MFT,負責站內相連的子系統設備之監視與控制。透過MFT,車站控制員能使用車站廣播系統、旅客諮詢系統(PIDS)及閉路電視系統之控制功能,以瞭解車站內所有相連設備之故障告警資訊及故障細節。

The Multi-Function Terminal (MFT) in the core E&M system of TIAA MRT is a workstation running with OS. The main function of the MFT is to provide remote monitoring and control to E&M control systems (including the BMS system) and relevant equipment and facilities. With assistance of the MFT, the OCC can comprehensively grasp firsthand information and will result in faster response and raised rescue efficiency.
To acquire comprehensive data of the TIAA MRT lines, the MFT of SCADA in the TIAA MRT system is installed in CCR, DCC, each station, maintenance management center and PTR. Following is a general introduction of MFT that is installed in the CCR, DCC and stations.
CCR is the core control center for the TIAA MRT system located inside the Chingpu Depot operational room that runs nonstop all year round. The staff in this operation room comprises of the Duty Manager, Line Controller, Information Assistant and Engineering Controller. The CCR is responsible for monitoring the entire TIAA MRT System and manages all actions such as planned operation, operational control, distribution, backup support and emergency response.
The DDC, which is set at both Chingpu and Lujhu Depot, has control of the power supply system, BMS system, audio broadcast system, CCTV system, and setting points. In addition, the DDC in Chingpu Depot can support Lujhu Depot on power supply distribution.
In the Platform Operation Room at each station, it is equipped with a set of MFT that can control the subsystems connected to the station. Via MFT, the controllers in the operation room can control the audio broadcast system, PIDS system and CCTV system and relevant staff can read all details regarding equipment error alerts on the MFT display.

  • 機廠控制中心監看核心機電子系統設備狀態。
  • 分享: